
Spark Detection and Extinguishing System Review
Where spark detection fits in dust collection, what the codes ask for, and what an engineer's review of the system covers.
Estimate your cost
A spark detection and extinguishing system watches the ductwork ahead of a dust collector, silo or other vessel for burning particles and acts before they arrive, so a spark from a machine does not become a fire or explosion in the collected dust. An engineer's review checks where those sparks come from, whether the detection and its response suit the process, and how the system fits with the other protection on the same equipment.
What is a spark detection and extinguishing system?
A spark detection and extinguishing system is a set of sensors and response devices on a duct or conveyor that detects burning particles and puts them out, or triggers other devices such as a process shutdown, before they reach equipment holding combustible dust.
NFPA 69, Standard on Explosion Prevention Systems, deals with this in its chapter on predeflagration detection and control of ignition sources, which covers optical and gas sensing design, testing, protection system design and operation, actuation of other devices and process shutdown.
Where is spark detection on a dust collector used?
Spark detection on a dust collector is used in the ducts upstream of it, where sparks or hot particles from the process, or from foreign material in the stream, could be carried into the collector along with the dust.
The national fire code requires separators to keep out foreign material that may cause sparks in conveying equipment, dust collectors and dust-producing machines (Article 5.3.1.9), and keeps machines that generate sparks off woodworking exhaust systems (Sentence 5.3.2.1 (2)). Detection adds a check on what still gets through.
What does a spark detection review check?
A spark detection review checks five things: where ignition sources enter the duct, how foreign material is kept out, how the detection and its response are laid out, how the system is tested and recorded, and how it fits the collector's other protection.
| Item | What is checked | Where it is set |
|---|---|---|
| Ignition sources upstream | Which machines and processes can send sparks, hot particles or heat into the duct | NFC 5.3.1.10; BC OHS 6.147 |
| Foreign material | Separators or other means that keep spark-causing material out of conveyors and collectors | NFC 5.3.1.9; BC OHS 6.150 |
| Detection and response | How the sensing system is laid out, what it actuates, and when the process shuts down | NFPA 69, Ch. 9 |
| Testing and records | How the system is tested, inspected and maintained, and what is recorded | NFPA 69, Ch. 9 and 15 |
| Fit with other protection | How detection works alongside venting, suppression or isolation on the same collector | NFPA 69 |
Who needs a spark detection review, and when is it required?
A plant needs a spark detection review when a DHA or a fire inspection points to sparks or hot particles reaching a dust collector or silo, or before a new detection system is specified, because the codes require ignition sources to be controlled without naming the device.
In British Columbia, once a combustible dust management program is required, section 6.147 of the OHS Regulation requires competent ignition sources to be removed or, if that is not practicable, controlled, from January 4, 2027. The combustible dust fire code page sets out the national ignition source articles.
How does a spark detection review differ from a fire code review or a DHA?
A spark detection review focuses on one ignition control on one line of ductwork, while a fire code review checks the whole dust-producing process against the code and a dust hazard analysis looks at every fire and explosion scenario.
Spark detection often appears as a DHA recommendation for a collector that also has venting or isolation; the explosion venting design page covers those devices, and DHA close-out planning covers putting such items in order.
What does a spark detection and extinguishing system review cost, and how long does it take?
The engineering review behind a spark detection and extinguishing system starts at $3,500–$7,500 before HST for one process or collection system and typically takes 2–4 weeks from go-ahead; that range covers the review, not the system itself.
The estimator here is set to a fire code compliance review, the study that covers spark detection. The study price list gives every study's starting range.
Spark detection questions
Does the fire code require spark detection?
Spark detection is not named in the national fire code, which requires open flames, sparks and heat in dust-producing processes to be controlled or not permitted. Article 5.3.1.10 (1) of the National Fire Code of Canada 2020 sets that rule, and Article 5.3.1.9 requires separators against spark-causing foreign material.
Is spark detection the same as explosion suppression?
Spark detection is not the same as explosion suppression: it acts on burning particles before a deflagration, while suppression acts on a deflagration that has already started. NFPA 69 covers the first in Chapter 9 and suppression in Chapter 10.
How often is a spark detection system tested?
A spark detection system is tested when it is accepted and then at the intervals its standard sets for that type of system. NFPA 69 includes testing in Chapter 9 and brings its inspection, testing and maintenance rules together in Chapter 15 in the 2024 edition.
What happens if sparks reach a dust collector?
Sparks or hot particles that reach a dust collector can ignite the collected dust and start a fire or deflagration inside it. Section 6.147 of BC’s OHS Regulation requires competent ignition sources to be removed or controlled where combustible dust is handled, from January 4, 2027.
Sources
- National Fire Code of Canada 2020 (opens in a new tab), National Research Council Canada.
- NFPA 69, Standard on Explosion Prevention Systems (opens in a new tab), National Fire Protection Association.
- Approved amendments for Part 6, Combustible Dusts, in the Occupational Health and Safety Regulation and the Prevention Manual (opens in a new tab), WorkSafeBC.
- OSH Answers: Combustible Dust (opens in a new tab), Canadian Centre for Occupational Health and Safety.