Skip to content
DustHazardAnalysis.ca
Menu

DHA Revalidation

When a dust hazard analysis has to be reviewed again, what triggers an early update, and what the revalidation checks.

Estimate your cost

Would you like to get pricing for the following equipment that will likely be required as a result of your study?

DHA revalidation is the scheduled second look at a dust hazard analysis: the engineer goes back through the plant, compares it with the last report, and checks whether the hazards, the safeguards and the rules have moved on. NFPA's standard sets a five-year cycle, but a new line, a new collector or a new dust usually brings the work forward.

When is DHA revalidation due?

DHA revalidation is due at least every five years under NFPA 652, and earlier whenever the rooms, equipment, processes or dust have changed enough that the last analysis no longer describes the plant.

NFPA describes NFPA 652 as requiring the DHA to be reviewed and updated every five years, and the US Chemical Safety Board made the same five-year revalidation a recommendation after the 2017 Didion Milling explosion in Wisconsin.

What brings a DHA revalidation forward?

A DHA revalidation comes forward when the plant changes: new or modified rooms or buildings, new or changed machinery and equipment, different work processes, a new dust, or a change in the rules the plant has to meet.

British Columbia writes this into law from January 4, 2027: section 6.140 (3) requires the combustion risk assessment to be updated as soon as practicable after a significant change in rooms, buildings or other structures, machinery or equipment, or work processes. NFPA 660's 2025 edition also defines management of change.

What does a DHA revalidation check?

A DHA revalidation checks six things: what changed since the last study, what happened to its recommendations, whether the dust data still applies, whether protection still works, which rules changed, and how the study fits NFPA 660.

What a DHA revalidation re-checks, and the source behind each item
ItemWhat is checkedSource
Changes since the last DHANew or modified rooms, equipment and processes, and any new dustBC OHS 6.140 (3); NFPA 660 management of change
The old recommendationsWhich were closed, changed or are still open, and the record for eachNFPA 652 DHA review
Dust dataWhether test results still describe the dust the plant handles nowBC OHS 6.137-6.139
Protection and controlsWhether vents, isolation, suppression and interlocks are still in place, inspected and effectiveBC OHS 6.141 (2) (c) (ii); NFPA 69 Ch. 15
Code changesRules that changed since the last study, such as BC’s amendments and Ontario’s deeming clauseBC OHS (January 4, 2027); Ontario Fire Code 5.3.2.1 (3)
The standardReframing against NFPA 660, including its new self-heating and reactivity evaluationNFPA 660 (2025)

Do property insurers look at a DHA?

Property insurers can bring their own loss prevention standards to a combustible dust plant, and FM, a property insurer, publishes the data sheets its engineering field staff use with clients, including one on combustible dusts.

FM makes its property loss prevention data sheets, among them 7-76 Combustible Dusts, available free of charge. Ontario's pre-start review guideline for dust collectors also lists FM Global property loss prevention data sheets among the references a reviewer may use. Insurers set their own conditions in each policy, so ask yours what it expects.

How does a DHA revalidation differ from a close-out plan?

A DHA revalidation re-examines the hazards themselves, while a close-out plan works through the recommendations an existing DHA already made, so a revalidation often starts by checking how far the last close-out got.

The DHA recommendations implementation page covers the close-out plan, and the dust hazard analysis page describes a first DHA.

What does DHA revalidation cost, and how long does it take?

Revalidating the DHA of a single process or collector is priced from $5,000–$9,000 before HST, and the updated report usually follows 3–6 weeks after go-ahead, longer where the plant has changed a lot since the last study.

DHA update or revalidation, one process or dust collection system$5,000–$9,000Starting range, before HST. The estimator on this page gives a range for your own facility.

The estimator here is set to this study; the main cost page lists every study.

See all combustible dust guides, including is my dust combustible.

DHA revalidation questions

How often does a DHA need revalidation?

A DHA needs revalidation at least every five years, and sooner after a significant change to the plant, its processes or its dust. NFPA 652 requires the DHA to be reviewed and updated every five years.

Is BC’s annual program review the same as a DHA update?

BC’s annual program review checks the combustible dust management program, not the hazard analysis behind it, so it does not replace a DHA update. From January 4, 2027, a qualified person carries it out at least once a year under section 6.142.

Does NFPA 660 change how a revalidation is done?

A revalidation now has more to consider under NFPA 660, though the five-year cycle stays. NFPA lists new 2025 requirements to evaluate self-heating, thermal instability, water reactivity and chemical reactivity hazards, and to carry out operational readiness reviews.

What happens if a DHA is never revalidated?

A DHA that is never revalidated drifts away from the plant it describes, so new equipment, dusts and open recommendations go unassessed. The US Chemical Safety Board recommended after the 2017 Didion Milling explosion that DHAs be revalidated at least every five years.

Sources

  1. NFPA 652, Combustible Dust Awareness and Hazard Evaluation (online training series) (opens in a new tab), National Fire Protection Association.
  2. NFPA 660, Standard for Combustible Dusts and Particulate Solids (opens in a new tab), National Fire Protection Association.
  3. Approved amendments for Part 6, Combustible Dusts, in the Occupational Health and Safety Regulation and the Prevention Manual (opens in a new tab), WorkSafeBC.
  4. Didion Milling Company Explosion and Fire (opens in a new tab), U.S. Chemical Safety and Hazard Investigation Board.
  5. NFPA 69, Standard on Explosion Prevention Systems (opens in a new tab), National Fire Protection Association.
  6. O. Reg. 213/07: Fire Code (Division B, Section 5.3, Dust Producing Processes) (opens in a new tab), Government of Ontario, e-Laws.
  7. Guideline for pre-start health and safety reviews, Item 5: Dust collectors (opens in a new tab), Government of Ontario.
  8. FM property loss prevention data sheets (opens in a new tab), FM (FM Global).