Skip to content
DustHazardAnalysis.ca
Menu

Combustible Dust Industries

Which industries handle combustible dust, the dust and equipment typical of each, and the rules that name them.

Estimate your cost

Would you like to get pricing for the following equipment that will likely be required as a result of your study?

Combustible dust industries are any that make, move or store fine solid particles that can burn: sawmills and woodworking, food, grain and feed, metal working and powders, plastics, rubber and chemicals, and pharmaceuticals. Each has its own dusts, equipment and history, and a few have rules written for them by name, so the pages below take each industry in turn.

Which combustible dust industries does this site cover?

Five groups of combustible dust industries are covered here, and the table shows the dust each handles, its typical equipment and the rules that name it, with a link to the page for each.

Combustible dust industries: dust types, typical equipment and the rules that name them
IndustryDustTypical equipmentRules that name it
Wood products and sawmillsWood dust, sawdust, shavings, sanding dustDebarkers, saw lines, waste conveyors, baghouses, planers, sandersNFC 5.3.2 (NFPA 664); Ontario Fire Code 5.3.2; Ontario Reg. 851 s. 65; BC’s former wood-only rules
Food, grain and feedGrain, flour, sugar, starch, feedElevator legs, belt conveyors, silos, mills, mixers, packaging linesNFC 5.3.3 grain handling; Ontario Fire Code 5.3.3; federal list (generally the Canada Labour Code)
Metal dustAluminum, magnesium and other metal dusts and powdersGrinders, polishers, blasting, dust collectors, powder handlingOntario Reg. 851 s. 65; BC OHS 6.154–6.155; NFPA 484 (now in NFPA 660)
Plastics, rubber and chemicalsPolymer, resin, rubber and chemical powdersGrinders and regrind, compounding, coating, pneumatic conveying, dryersGeneral dust rules; WHMIS Combustible Dusts class
Pharmaceutical and nutraceuticalActive ingredients, excipients, nutraceutical powdersMills, blenders, granulators, dryers, presses, containmentGeneral dust rules; WHMIS Combustible Dusts class

What do dust explosions across industries have in common?

Dust explosions across industries share a pattern: dust allowed to build up, a collector, conveyor or mill where it is suspended and confined, an ignition source such as friction or hot equipment, and a first explosion that lifts settled dust into a larger one.

The US Chemical Safety Board's 2006 study found wood, food-related products and metals each behind over 20 percent of explosions, and plastics behind 14 percent. WorkSafeBC's findings on the two 2012 British Columbia sawmill explosions describe the same chain, from airborne dust to secondary explosions.

Which rules name a particular industry?

Only a few Canadian rules name an industry: the fire code's woodworking and grain handling subsections, Ontario's collector rule for aluminum, magnesium and wood flour, British Columbia's metal dust sections, and the federal list for grain, feed and seed workplaces.

Those listed workplaces generally come under the Canada Labour Code, and the engineer confirms which rules apply to a site. Everything else applies to any combustible dust, whatever the industry. The combustible dust regulations by province page sets out the rules province by province, and the dust hazard analysis page describes the study that applies them to a plant.

How should a plant in one of these industries start?

A plant in one of these industries should start by listing its dusts and the equipment that handles them, checking whether test data exists, and asking for a dust hazard analysis of the process or collector that worries it most.

The estimator on this page gives a starting figure for that first study, and the price overview lists every study's starting range.

The guides answer the questions that come first, such as whether a dust is combustible and when a DHA is due again.

Questions about an industry not listed here can go through the contact page; how the site works is on the about page, and how your information is handled and the site's terms have their own pages.

Combustible dust industry questions

Which industries have the most dust explosions?

Food products, lumber and wood products, chemicals and primary metals account for over half of the dust incidents in the most-cited study. The US Chemical Safety Board’s 2006 study counted 281 incidents between 1980 and 2005, 24 percent of them in food products.

Which equipment is most often involved in dust explosions?

Dust collectors are the equipment most often involved in combustible dust incidents, followed by grinders, silos, hoppers and mixers. The US Chemical Safety Board’s 2006 Combustible Dust Hazard Study reports that finding across all industries.

Do the BC rules cover industries other than wood?

The BC rules cover every industry that makes or handles a combustible dust, not only wood. WorkSafe Magazine notes that combustible dust management programs previously applied only to wood dust, and the amendments extend them to metals, plastics and flours from January 4, 2027.

Is my industry on the list if it is not shown here?

An industry not shown here can still need a DHA, because the rules turn on whether a dust is combustible, not on the industry name. The national fire code’s dust section applies wherever combustible dusts create an explosion or fire hazard (Article 5.3.1.1).

Sources

  1. Investigation Report: Combustible Dust Hazard Study (Report No. 2006-H-1) (opens in a new tab), U.S. Chemical Safety and Hazard Investigation Board.
  2. Preparing for regulatory updates (WorkSafe Magazine, Fall 2026) (opens in a new tab), WorkSafeBC.
  3. National Fire Code of Canada 2020 (opens in a new tab), National Research Council Canada.
  4. O. Reg. 213/07: Fire Code (Division B, Section 5.3, Dust Producing Processes) (opens in a new tab), Government of Ontario, e-Laws.
  5. R.R.O. 1990, Reg. 851: Industrial Establishments (sections 7 and 63 to 65) (opens in a new tab), Government of Ontario, e-Laws.
  6. Approved amendments for Part 6, Combustible Dusts, in the Occupational Health and Safety Regulation and the Prevention Manual (opens in a new tab), WorkSafeBC.
  7. NFPA 484, Standard for Combustible Metals (opens in a new tab), National Fire Protection Association.
  8. NFPA 660, Standard for Combustible Dusts and Particulate Solids (opens in a new tab), National Fire Protection Association.
  9. Hazardous Products Regulations (SOR/2015-17), Subpart 17 Combustible Dusts and Schedule 5 (opens in a new tab), Government of Canada, Justice Laws.
  10. List of federally regulated industries and workplaces (opens in a new tab), Government of Canada.