Skip to content
DustHazardAnalysis.ca
Menu

Dust Hazard Analysis in BC

How WorkSafeBC's combustible dust rules, in force January 4, 2027, line up with a DHA, and what the BC Fire Code adds.

Estimate your cost

Would you like to get pricing for the following equipment that will likely be required as a result of your study?

If your BC workplace makes, moves or stores dust, the questions a dust hazard analysis answers are about to become part of the workplace safety rules. From January 4, 2027, employers must find out whether their dust can burn or explode, write down how serious the risk is with help from a qualified person, and put controls in place wherever there is a hazard. BC calls the written review a combustion risk assessment. In practice, a dust hazard analysis in BC and the combustion risk assessment ask the same questions.

What changes on January 4, 2027?

From January 4, 2027, British Columbia's Occupational Health and Safety Regulation covers every combustible dust at a workplace, not only wood dust, with new duties to identify, assess and control the hazards it creates.

WorkSafeBC's Board of Directors approved new combustible dust sections for Part 6 of the Occupational Health and Safety Regulation in November 2025, sections 6.133 to 6.159, and set them to take effect on January 4, 2027. Until then, WorkSafeBC combustible dust rules were built around wood: in the words of WorkSafe Magazine, "Previously, combustible dust management programs applied only to wood dust." They now include metal, plastic and flour dust.

The sections apply to dust that is an input, product, byproduct or waste of a work process. Two cases are left out: a workplace where there is no reasonably foreseeable risk of injury or death to a worker from the combustion of dust, and dust in a sealed commercial package. Section 5.81, the old one-line rule on removing combustible dust, is repealed, and three WorkSafeBC policies on wood dust mitigation and control are retired.

Does BC's combustible dust rule apply to my workplace?

BC's combustible dust rules apply to any workplace where dust is an input, product, byproduct or waste of a work process, unless the dust is sealed in a commercial package or there is no reasonably foreseeable risk of a dust combustion harming a worker.

Does the BC rule apply to you? 5 questions

  1. Does a work process at your BC workplace make or handle dust, as an input, product, byproduct or waste?Yes: Go to question 2.No: The combustible dust sections do not apply to that dust (section 6.134 (1)).
  2. Is all of the dust in sealed commercial packages?Yes: Dust in a sealed commercial package is outside the sections (section 6.134 (2) (b)).No: Go to question 3.
  3. Is there a reasonably foreseeable risk of injury or death to a worker from the combustion of the dust?Yes: Go to question 4.No: A workplace with no such risk is outside the sections (section 6.134 (2) (a)).
  4. Do you hold a written determination, made with a qualified person and based on a recognized screening test or published data, that the dust is neither ignitable nor deflagrable?Yes: The dust is not a combustible dust, and no combustion risk assessment is needed for it (sections 6.137 to 6.139).No: The dust is assumed to be ignitable and deflagrable, and a written combustion risk assessment is required (sections 6.135 and 6.137). Go to question 5.
  5. Does the combustion risk assessment identify a combustion hazard?Yes: A combustible dust management program and worker instruction and training are required (sections 6.135, 6.141 and 6.143).No: No management program is required, and the control sections 6.147 to 6.159 do not apply (section 6.146).

The sections cited are in the amended Occupational Health and Safety Regulation, in force January 4, 2027. The engineer confirms the answers for your site.

How does a dust hazard analysis in BC map to the new requirements?

A dust hazard analysis in BC maps step by step onto the amended regulation: the dust determination, the combustion risk assessment, the management program, the update and review cycle, and worker training and records.

The amended regulation never uses the term DHA, but each part of a DHA has a matching duty. Section 6.135 sets the order.

How a DHA lines up with the amended OHS Regulation
DHA stepBC requirementSection
Is the dust combustible?Assume it is ignitable and deflagrable unless a written determination, made with a qualified person and based on a recognized screening test or published data, shows otherwise6.137–6.139
Identify and evaluate hazardsA written combustion risk assessment of each combustion hazard, its level of risk and the factors that increase it6.140
Recommend safeguardsWhere a hazard is found, a combustible dust management program describing how the controls in sections 6.147 to 6.159 are carried out6.141
Review and updateUpdate the assessment after a significant change; a qualified person reviews the whole program at least annually6.140 (3), 6.142
Train and keep recordsInstruction and training for workers who could be exposed; dust records kept as long as the dust is generated or handled6.143, 6.144

Each of these steps is carried out in consultation with the joint health and safety committee or the worker representative, or a representative sample of workers where neither exists (section 6.136). The two documents that follow from the assessment have their own pages: the combustion risk assessment and the combustible dust management program.

How does a BC combustion risk assessment differ from a DHA and other dust studies?

In British Columbia, the combustion risk assessment is the document WorkSafeBC's rules require from January 4, 2027, and the table below shows how it sits beside a DHA, Ontario's dust collector pre-start review and combustible dust testing.

What each laboratory test measures, and the BC identification sections it serves, is on the combustible dust testing page.

Four combustible dust studies compared. Starting ranges are for one process or dust collection system, before HST.
StudyPurposeWhat triggers itWho prepares itTypical outputStarting range
Dust hazard analysis (DHA)Identify and evaluate fire, flash fire and explosion hazards, and the safeguards for eachCombustible dust may be present in a process or facility compartment; reviewed at least every five years (NFPA 652)An engineer; on this site, a professional engineer licensed in the facility’s provinceA report listing each hazard, the safeguards in place, recommended safeguards and a plan to put them in$8,000–$15,000
BC combustion risk assessmentSet out each combustion hazard of a dust, its level of risk and the factors that increase it (OHS Regulation s. 6.140)Combustible dust at a BC workplace from January 4, 2027; updated after a significant changeThe employer, in consultation with a qualified person and the joint committee or worker representativeA written assessment, kept as a dust record for as long as the dust is handled$8,000–$15,000
Ontario dust collector pre-start reviewReview a dust collector before it goes into use (Regulation 851, section 7)A new or modified dust collector in a factory whose use involves a risk of ignition or explosionAn engineerThe engineer’s pre-start health and safety review, completed before the collector is used$3,500–$7,000
Combustible dust testingMeasure whether a dust cloud can explode and how violently (go/no-go screen, Kst and Pmax)Test data for the dust is missing, or a BC employer wants to show a dust is not combustibleA dust testing laboratory, from representative samples taken at the plantLaboratory results: the screening result, and Kst and Pmax values where they are measured$1,500–$4,000

What does a BC assessment cost, and how long does it take?

In British Columbia, a combustion risk assessment of a single process or dust collection system starts at $8,000–$15,000 before HST and usually takes 4–8 weeks from go-ahead to the final assessment, plus about 3–6 weeks when the dust needs laboratory testing.

The price climbs when a site has more collection systems or handles a metal dust, the number of processes decides where a site falls in that time frame, and the engineer gives a schedule with the quote. What the assessment covers, step by step, is on the combustion risk assessment page. For the management program that follows, WorkSafeBC's explanatory notes say section 6.141 sets no prescribed timeline for when it must be in place.

What does the BC Fire Code require for dust-producing processes?

As of November 2026, the BC Fire Code 2024 adopts the National Fire Code of Canada 2020 without changing its section on dust-producing processes, so cleaning, dust collection, collector location, bonding and explosion venting follow the national wording.

The code has applied since March 8, 2024, and fire inspectors designated by each local authority enforce it. Each article, and how it lines up with WorkSafeBC's own dust control sections, is on the BC Fire Code dust-producing processes page.

Which industries handle combustible dust in BC?

The BC rules reach every industry whose work processes make or handle a combustible dust: wood products, flour and food processing, metal fabrication and finishing, plastics and rubber, and any operation that loads, unloads or carries dust.

Wood products are the familiar case: sawmills, planer mills, panel plants and pellet plants, where the old wood dust rules already applied. Food, metal, plastics and rubber plants were not covered before, and loading, unloading and carrying dust count because the regulation's definition of handling includes transporting it.

An engineer working through the combustion risk assessment starts with the processes that make fine dust, such as sanding, grinding, milling and pneumatic conveying, and the places it can settle or be confined, such as collectors, silos, rafters and ducts. Each industry is set out on the combustible dust industries page.

BC combustible dust questions

Do the new BC rules apply only to sawmills and wood dust?

The new BC rules apply to every type of combustible dust, not only to sawmills and wood dust. WorkSafe Magazine (Fall 2026) explains that the amendments extend the requirements to all types of combustible dust, including dust from metals, plastics and flours, where previously combustible dust management programs applied only to wood dust.

Is a DHA the same as a BC combustion risk assessment?

A DHA and a BC combustion risk assessment cover close to the same ground, but they are not identical documents. Section 6.140 sets the assessment's own required content, including each combustion hazard, its level of risk and the factors that increase it, and the amended regulation does not mention NFPA or a DHA. A DHA written to NFPA 660 is a strong starting point that the engineer checks against that list.

When do the combustible dust rules take effect in BC?

The combustible dust rules take effect in BC on January 4, 2027. WorkSafeBC's Board of Directors approved the Part 6 amendments in November 2025 (decision 2025/11/14-07) and set that date to give employers time to prepare.

Can an employer treat its dust as not combustible?

An employer can treat its dust as not combustible only with a written determination, made with a qualified person and based on a recognized screening test. Section 6.137 requires the employer to assume the dust is ignitable and deflagrable unless that determination, based on a test such as the go/no-go method in ASTM E1226, shows otherwise.

Does the BC Fire Code require dust collectors to be outdoors?

A dust collector larger than 2.36 m³/s has to be outdoors under the BC Fire Code, as a rule, with explosion venting to the outdoors. Article 5.3.1.4 of the National Fire Code of Canada 2020, adopted as the BC Fire Code 2024, allows it inside only if it is vented to the outdoors, has an automatic explosion prevention system, or sits in a room with 1 h fire separations and outdoor venting.

How often do BC employers have to review the assessment and the program?

A BC employer updates the combustion risk assessment after any significant change and reviews the whole management program at least once a year. Section 6.140 (3) requires the update as soon as practicable after a significant change to buildings, machinery or work processes, and section 6.142 requires a qualified person to review the entire program at least annually.

What happens if a BC employer does not prepare a combustion risk assessment?

A BC employer with a combustible dust and no combustion risk assessment does not meet the general duty in the amended regulation from January 4, 2027. Section 6.135 requires the assessment for every combustible dust, and under section 6.137 the dust is assumed to be ignitable and deflagrable until a written determination shows otherwise.

Sources

  1. Approved amendments for Part 6, Combustible Dusts, in the Occupational Health and Safety Regulation and the Prevention Manual (opens in a new tab), WorkSafeBC.
  2. Board of Directors decision: Combustible dusts (2025/11/14-07) (opens in a new tab), WorkSafeBC.
  3. Backgrounder: Combustible dusts regulatory changes (opens in a new tab), WorkSafeBC.
  4. Preparing for regulatory updates (WorkSafe Magazine, Fall 2026) (opens in a new tab), WorkSafeBC.
  5. Upcoming amendments to requirements for combustible dusts (opens in a new tab), WorkSafeBC.
  6. BC Fire Code (opens in a new tab), Government of British Columbia.
  7. British Columbia Fire Code Order (2024) (opens in a new tab), Government of British Columbia.
  8. National Fire Code of Canada 2020 (opens in a new tab), National Research Council Canada.
  9. NFPA 652, Combustible Dust Awareness and Hazard Evaluation (online training series) (opens in a new tab), National Fire Protection Association.
  10. R.R.O. 1990, Reg. 851: Industrial Establishments (sections 7 and 63 to 65) (opens in a new tab), Government of Ontario, e-Laws.
  11. Fire Safety Act (SBC 2016, c. 19), sections 1, 8, 9 and 11 (opens in a new tab), Government of British Columbia, BC Laws.