
Metal Dust Hazard Analysis
Why metal dusts get their own rules, what Ontario and British Columbia require, and what a DHA covers in a metal shop, foundry or powder plant.
Estimate your cost
A metal dust hazard analysis looks at grinding, polishing, cutting, blasting, machining and powder handling in a metal shop, foundry or powder plant, and at the collectors and conveyors that carry the dust away. Fine metal dusts can ignite easily, burn very hot and react with water, so the rules give them their own requirements, and the analysis has to match the metal as well as the process.
What does a metal dust hazard analysis cover?
A metal dust hazard analysis covers every process that makes fine metal dust or handles metal powder, the collectors and ducts that carry it, how it is cleaned up, what could ignite it, and how a fire would be fought without making it worse.
NFPA 484, the combustible metals standard, covers metals that include alkali metals, aluminum, hafnium, magnesium, niobium, tantalum, titanium and zirconium, from production and finishing to handling, recycling and storage, wherever they are in a form that can burn or explode.
Which rules apply to aluminum dust and other metal dusts?
Aluminum dust and other metal dusts are named in Ontario's collector location rule and in British Columbia's metal dust sections from January 4, 2027.
| Question | What the rule says | Where it is set |
|---|---|---|
| Where the collector goes | A collector for aluminum, magnesium or other fine, easily ignitable dust sits outdoors or in a separate vented room | Ontario Reg. 851, s. 65 |
| How much dust may build up | A maximum set with a qualified person, weighing reactions with metal oxides, gas-producing reactions and molten metal | BC OHS 6.154 (2) |
| How dust is cleaned up | Conductive non-sparking scoops and brooms first, then vacuum, then compressed air, then water or another safe substance | BC OHS 6.154 (4) |
| Very sensitive metal dust | Below 30 mJ minimum ignition energy: workers grounded through PPE, grounded and bonded spark-resistant tools | BC OHS 6.155 (2) |
| Other flammables nearby | Limited to the quantity reasonably needed for one work shift | BC OHS 6.155 (3) |
BC's section 6.155 also requires worker access around pneumatic conveying of metal dust to be regulated with a qualified person where the system creates a combustion hazard.
What do metal dust investigations show?
Metal dust investigations by the US Chemical Safety Board show explosions starting in dust collectors that were not vented or cleaned, then travelling through ducts, and metals account for over 20 percent of the dust explosions in its 2006 study.
At Hayes Lemmerz International in Huntington, Indiana, in October 2003, the CSB found that drying and conveying aluminum chips made an explosive dust that was pulled into a dust collector, where the explosion likely began before spreading through the ducting.
What about additive manufacturing powder?
Additive manufacturing powder is a combustible metal powder in its own right, so loading, sieving, recovering and storing it falls under the same metal dust rules, and NFPA has revised its additive manufacturing requirements for the growing use of metal powders.
NFPA's 2022 edition of NFPA 484 revised its additive manufacturing chapter, and NFPA 660's 2025 edition updates those requirements and adds new test standards for portable vacuum cleaners used with combustible metals.
Who needs a metal dust hazard analysis, and where are the plants?
Metal fabricators, finishers, foundries, aluminum processors and powder users with dust collectors or pneumatic conveying need a metal dust hazard analysis, and Statistics Canada counts most aluminum processors and foundries in Ontario.
Statistics Canada's 2025 employer establishment counts, published by Innovation, Science and Economic Development Canada, show 94 alumina and aluminum production and processing establishments in Canada, 42 of them in Ontario and 10 in British Columbia, and 152 foundries, with 68 in Ontario, 19 in British Columbia and 11 in Alberta.
How does a metal dust DHA differ from a DHA for other dusts?
A metal dust DHA adds checks most other dusts do not need: reactions with water and metal oxides, cleanup tools, very low ignition energies, and how a fire will be fought.
Testing is often the first step; the combustible dust testing page lists the tests, and the explosion venting design page covers protection. The dust hazard analysis page describes the study itself.
Every other industry the site covers is on the combustible dust industries list.
What does a metal dust hazard analysis cost, and how long does it take?
Metal shops and foundries can expect a metal dust hazard analysis of a single process or collector to start at $8,000–$15,000 before HST; the report generally follows 4–8 weeks after go-ahead, and testing the metal dust first adds another 3–6 weeks.
The estimator on this page is set to a dust hazard analysis of metal dust. The cost summary lists every study's starting range, and the regulations by province page has the provincial rules.
Metal dust questions
Can water be used on a metal dust fire?
Water can make some metal fires much worse, so the extinguishing method has to suit the metal. NFPA describes NFPA 484 as developed in response to fires where fire suppression water was used inappropriately, often with disastrous results.
Is aluminum dust treated differently in Ontario?
Aluminum collectors in Ontario go outdoors or into a separate vented room, because the collector location rule names aluminum. Section 65 (1) of Regulation 851 names aluminum, magnesium and other fine, easily ignitable dust.
Does additive manufacturing powder need a DHA?
Metal powder used in additive manufacturing needs the same hazard analysis as any combustible metal dust, plus attention to how powder is loaded, sieved and recovered. NFPA revised the additive manufacturing chapter of NFPA 484 in 2022 for the growing use of metal powders, and NFPA 660 updates those requirements.
How often should a metal shop’s DHA be redone?
A metal shop’s DHA should be reviewed at least every five years, the NFPA 652 cycle, and whenever a new alloy, process or collector arrives. In BC, the combustion risk assessment must be updated as soon as practicable after a significant change (section 6.140 (3)).
What happens if metal dust is swept with an ordinary broom?
An ordinary broom can create static or sparks in fine metal dust, which is why the cleanup tools are set by rule in BC. Section 6.154 (4) requires conductive, non-sparking scoops and brooms with natural-fibre bristles as the first method, from January 4, 2027.
Sources
- R.R.O. 1990, Reg. 851: Industrial Establishments (sections 7 and 63 to 65) (opens in a new tab), Government of Ontario, e-Laws.
- Approved amendments for Part 6, Combustible Dusts, in the Occupational Health and Safety Regulation and the Prevention Manual (opens in a new tab), WorkSafeBC.
- NFPA 484, Standard for Combustible Metals (opens in a new tab), National Fire Protection Association.
- NFPA 660, Standard for Combustible Dusts and Particulate Solids (opens in a new tab), National Fire Protection Association.
- NFPA 652, Combustible Dust Awareness and Hazard Evaluation (online training series) (opens in a new tab), National Fire Protection Association.
- Investigation Report: Combustible Dust Hazard Study (Report No. 2006-H-1) (opens in a new tab), U.S. Chemical Safety and Hazard Investigation Board.
- Canadian Industry Statistics, Alumina and aluminum production and processing (NAICS 3313): establishments (Statistics Canada data) (opens in a new tab), Innovation, Science and Economic Development Canada.
- Canadian Industry Statistics, Foundries (NAICS 3315): establishments (Statistics Canada data) (opens in a new tab), Innovation, Science and Economic Development Canada.