Skip to content
DustHazardAnalysis.ca
Menu

Dust Hazard Analysis Cost

Starting ranges for a DHA and the related combustible dust studies, what moves the price, and what the price covers.

Estimate your cost

Would you like to get pricing for the following equipment that will likely be required as a result of your study?

The dust hazard analysis cost for a typical first study, covering a single dust-producing process or collection system, begins at $8,000–$15,000 before HST. This page shows one starting range for each related study, explains in plain words what moves a price up or down, and lists what the price includes and what it leaves out. The estimator on the page gives a range for your own facility from five questions.

How much does a dust hazard analysis cost?

Plan on $8,000–$15,000 before HST as the opening range for one process or collection system, with larger plants and metal or pharmaceutical dusts above it; the engineer confirms the figure for a dust hazard analysis after a short call.

The range covers the engineer's work: gathering information, the walk-down, the evaluation of fire, flash fire and explosion scenarios, and the report with its recommendations. It is a starting range for planning, not a quote.

What is the starting range for each combustible dust study?

Every combustible dust study offered through this site has one starting range, shown below for one process or dust collection system before HST, and three of them apply only in the province whose rule creates them.

Offered in every province the estimator covers unless marked. Starting range for one process or dust collection system, before HST. Times are typical, from go-ahead to the report; the engineer confirms the schedule with the quote.
StudyStarting rangeTypical time from go-ahead
Dust hazard analysis (first DHA)$8,000–$15,0004–8 weeks
DHA update or revalidation$5,000–$9,0003–6 weeks
Combustion risk assessment (BC only)$8,000–$15,0004–8 weeks
Combustible dust management program (BC only)$6,000–$12,0003–6 weeks
Combustible dust testing$1,500–$4,0003–6 weeks for laboratory results
Dust collector Pre-Start Health and Safety Review (Ontario only)$3,500–$7,0002–4 weeks to the sealed report
Explosion protection design (venting, suppression, isolation)$6,000–$14,0004–8 weeks
Fire code compliance review for dust-producing processes$3,500–$7,5002–4 weeks
Hazardous location classification$4,000–$9,0003–6 weeks
Static electricity and bonding/grounding review$3,500–$7,5002–4 weeks
Review of open recommendations in an existing DHA$4,000–$9,0002–4 weeks

What changes the price of a dust hazard analysis?

The price of a dust hazard analysis rises with the number of dust-producing processes or collection systems, with dusts such as metal or pharmaceutical dust, and with missing test data, and it falls when good drawings and earlier reports are ready.

  • Number of processes and collectors. Each process, collector, duct run and room is walked down and evaluated, so a larger plant takes more engineering time.
  • Type of dust. A metal or pharmaceutical dust costs more than the starting range.
  • Test data. Existing Kst and Pmax results for your dust shorten the work; where they are missing, sampling and laboratory testing are added and quoted separately.
  • Province. Three studies are province-specific, each a separate study with its own starting range: British Columbia's combustion risk assessment, British Columbia's combustible dust management program, and Ontario's dust collector pre-start review.
  • What you already have. An existing DHA with open recommendations, or a report to revalidate, is a different, smaller job than a first analysis.

Who carries out the studies is set out on the about page; personal information and use of the site are covered by their own policies. For a question about a quote, email us.

What does the price include and leave out?

The price of a DHA includes the engineer's analysis and the written report with its recommendations, and leaves out HST, laboratory dust testing and any equipment or construction the report recommends.

  • Included: review of drawings, equipment lists and material data, the site walk-down, the evaluation of hazards and existing safeguards, and the report with an implementation plan.
  • Separate: dust sampling and laboratory testing where data is missing, quoted separately.
  • Not included: HST, and the equipment, installation or building work the report recommends.

How long does a dust hazard analysis take?

Measured from go-ahead, a single-process dust hazard analysis usually reaches its final report within 4–8 weeks, and laboratory testing of the dust, when required, typically adds 3–6 weeks.

The schedule is driven by two things, the evaluation stage of the engineer's work and any wait for laboratory results on untested dust, and the quote includes a schedule for your site.

The walk-down itself is usually quick compared with the evaluation. Having drawings, an equipment list, material data and any past incident records ready before the visit shortens the work.

Why can a DHA lead to equipment spending?

A DHA can lead to equipment spending because its recommendations often call for protection on dust collectors, such as explosion vents, isolation valves, rotary airlocks and spark detection, or for moving a collector outdoors.

Under Article 5.3.1.4 of the national fire code, an indoor collector above 2.36 m³/s has to gain outdoor venting, an automatic explosion prevention system or a fire-separated room, or move outside, which is often where equipment spending begins. Which devices a plant needs, and their sizes, come out of the engineer's analysis; the equipment step of the estimator can put you in touch with a supplier for pricing.

What does combustible dust testing cost?

Combustible dust testing cost starts at $1,500–$4,000 before HST, quoted by the laboratory separately from the DHA and listed in the table above with the other combustible dust studies.

Testing is needed only where data for your dust is missing, or in British Columbia where an employer wants to show that a dust is not combustible.

Dust hazard analysis cost questions

How much does a dust hazard analysis cost?

For one process or collection system, the starting range of a dust hazard analysis is $8,000–$15,000 before HST. The engineer confirms the price after a short call, once the processes, the dust and any existing test data are known.

Is dust testing included in the DHA cost?

Dust testing is not included in the DHA cost: where a dust needs testing, the laboratory work is quoted separately. Testing such as the go/no-go screen in ASTM E1226, or Kst and Pmax values, is only needed where data for the dust is missing.

Does the DHA price include the equipment it recommends?

The DHA price covers the engineer’s analysis and report, not the equipment the report recommends. Explosion vents, isolation valves or moving a collector over 2.36 m³/s outdoors under the National Fire Code of Canada 2020 are priced separately, by the supplier or contractor that does the work.

Are the starting ranges before tax?

Every starting range on this site is before HST. The ranges are for the engineering work for one process or dust collection system, and the engineer confirms the scope and price for your facility.

Why does an update cost less than a first DHA?

An update or revalidation of a dust hazard analysis starts lower than a first DHA because it works from the existing report. NFPA 652 calls for the DHA to be reviewed and updated at least every five years.

Sources

  1. NFPA 652, Combustible Dust Awareness and Hazard Evaluation (online training series) (opens in a new tab), National Fire Protection Association.
  2. NFPA 660, Standard for Combustible Dusts and Particulate Solids (opens in a new tab), National Fire Protection Association.
  3. National Fire Code of Canada 2020 (opens in a new tab), National Research Council Canada.