Skip to content
DustHazardAnalysis.ca
Menu

Is My Dust Combustible?

A short decision checklist, from whether a process makes dust at all to whether to test it or assume it is combustible.

Estimate your cost

Would you like to get pricing for the following equipment that will likely be required as a result of your study?

"Is my dust combustible" is the first question behind every dust hazard analysis, and it often has a quick answer. If a work process makes or handles a fine solid, and the dust has been shown to burn or explode in air, treat it as combustible; if nobody knows, you either test it or assume it. The checklist below walks through those steps using British Columbia's identification rules and the WHMIS criteria.

How do I tell if my dust is combustible?

You can tell if your dust is combustible by working from whether a process makes it, through its safety data sheet and any evidence it has burned in air, to a final choice between testing it and assuming it is combustible.

Is my dust combustible? 6 questions

  1. Does a work process make, use, store or carry the dust, as an input, product, byproduct or waste?Yes: Go to question 2.No: BC’s combustible dust sections apply to dust from a work process; a dust that comes from none is outside them.
  2. Is the dust only ever present in a sealed commercial package?Yes: BC leaves dust in a sealed commercial package out of these sections (6.134 (2) (b)).No: Go to question 3.
  3. Does the supplier’s safety data sheet classify the product as a Combustible Dust?Yes: Treat it as combustible dust: WHMIS gives combustible dust its own hazard class, Category 1.No: Go to question 4; a product made on site, or a dust from processing, may have no data sheet at all.
  4. Has the dust been shown to catch fire or explode when dispersed in air?Yes: It meets the WHMIS Category 1 criterion in s. 7.17.1 (a), and BC would treat it as combustible.No: Go to question 5.
  5. Is it a flammable solid with 5.0% or more flammable solid by weight and a particle size of 500 µm or less?Yes: That is the second WHMIS Category 1 criterion, s. 7.17.1 (b).No: Go to question 6.
  6. Will you have the dust tested rather than assume it is combustible?Yes: In BC a written determination with a qualified person, by a named screening test or published objective data, can show it is not ignitable or not deflagrable.No: If you assume instead, BC treats the dust as ignitable and deflagrable (6.137), and a combustion risk assessment follows.

Based on sections 6.134 and 6.137 to 6.139 of BC's OHS Regulation (from January 4, 2027) and sections 7.17 and 7.17.1 of the Hazardous Products Regulations. An engineer confirms the answer for your dust.

What does WHMIS say makes a dust combustible?

WHMIS says a combustible dust is a mixture or substance in the form of finely divided solid particles that, upon ignition, is liable to catch fire or explode when dispersed in air, and it sets two criteria for its single category.

Category 1 covers a mixture or substance that has been shown to catch fire or explode when dispersed in air, or that is classified as a flammable solid, is 5.0% or more flammable solid by weight and has a particle size of 500 µm or less. The label signal word is "Warning".

Should I test my dust or assume it is combustible?

Testing makes sense when a negative result would change what you have to do, while assuming makes sense when the dust is very likely combustible anyway and the test would only confirm it.

The tests themselves, and what each measures, are on the dust testing page. If the answer is yes, the next step is a dust hazard analysis or, in British Columbia, a combustion risk assessment.

What happens after I know my dust is combustible?

After you know your dust is combustible, the work moves from the dust to the plant: where the dust is made, carried and settles, what could ignite it, and which safeguards are missing, which is what a dust hazard analysis sets out.

Starting ranges for testing and for each study are on the dust hazard analysis cost page, and the regulations by province page shows which rules apply where you are.

The other guides cover NFPA 660 in Canada and DHA revalidation.

Is my dust combustible? Questions

Is my dust combustible if nothing has ever caught fire?

Your dust can be combustible even if nothing has ever caught fire, because a dust only explodes when it is dispersed, confined and ignited at the same time. From January 4, 2027, BC’s section 6.137 has an employer assume a dust is ignitable and deflagrable unless shown otherwise.

Does a coarse or damp dust count?

A coarse or damp dust can still count, because handling can break it down and dry it out, and the fine fraction is what matters. The WHMIS flammable-solid criterion turns on a particle size of 500 µm or less (Hazardous Products Regulations, s. 7.17.1 (b)).

Who decides whether my dust is combustible in BC?

In BC the employer decides, in writing and in consultation with a qualified person, whether a dust is not ignitable or not deflagrable. Sections 6.138 and 6.139 of the OHS Regulation set that from January 4, 2027.

What happens if I just assume it is combustible?

If you assume a dust is combustible, you skip the screening test and go straight to managing it as a hazard. In BC that means preparing a combustion risk assessment under section 6.140, and then a management program if the assessment finds a combustion hazard.

Sources

  1. Hazardous Products Regulations (SOR/2015-17), Subpart 17 Combustible Dusts and Schedule 5 (opens in a new tab), Government of Canada, Justice Laws.
  2. Workplace Hazardous Materials Information System (WHMIS) (opens in a new tab), Health Canada.
  3. Approved amendments for Part 6, Combustible Dusts, in the Occupational Health and Safety Regulation and the Prevention Manual (opens in a new tab), WorkSafeBC.
  4. Combustible Dust Explained (opens in a new tab), National Fire Protection Association.
  5. OSH Answers: Combustible Dust (opens in a new tab), Canadian Centre for Occupational Health and Safety.