
Dust Hazard Analysis in Manitoba
How Manitoba's Workplace Safety and Health Regulation treats explosive dust, the 10% entry limit, and what the Manitoba Fire Code adds.
Estimate your cost
A dust hazard analysis in Manitoba fits a workplace rule that is short but strict. Manitoba's workplace safety and health rules treat explosive dust as a flammable substance, require safe work procedures for fire and explosive hazards, and keep workers out of any atmosphere above a tenth of the lower explosive limit. Hot work and fire protection follow the Manitoba Fire Code. A DHA gives the engineer's picture of where your dust could ignite and what those procedures need to cover.
Who needs a dust hazard analysis in Manitoba?
Any Manitoba workplace where explosive dust is present falls under Part 19 of the Workplace Safety and Health Regulation, so its employer needs to know where that dust is and how it could ignite, which is the question a DHA answers.
Part 19 applies to every workplace where combustible liquids, flammable liquids or flammable substances are present, or where hot work is done. The regulation's definition of a flammable substance takes in dust "capable of creating an explosive atmosphere when suspended in air in concentrations within the explosive limit of the dust". Nothing in Part 19 limits it to particular industries.
Manitoba's grain elevators, feed and seed mills, feed warehouses and grain-seed cleaning plants are generally governed by federal law rather than Part 19.
That is because they are on the federal list of regulated industries and workplaces under the Canada Labour Code, where section 17.11 of the federal regulations bars ignition sources in fire hazard areas and sets conditions for unavoidable hot work. The engineer confirms the rules that cover your site.
Grain and feed plants have their own food, grain and feed page.
When does Manitoba's Part 19 apply, and what does it require?
Manitoba's Part 19 applies whenever flammable substances, explosive dust included, are present or hot work is done, and asks for safe work procedures, fire protection to the Manitoba Fire Code, bonding or grounding during transfers, a 10% entry limit and hot work to the fire code.
- Section 19.2. The employer develops and implements safe work procedures for fire and explosive hazards, including hot work, trains workers in them and makes sure they are followed.
- Section 19.3. Fire protection equipment and portable extinguishers are installed and located in accordance with the Manitoba Fire Code.
- Section 19.7. Static charge during the transfer of a flammable liquid or explosive substance between containers is prevented by bonding or grounding.
- Section 19.8. No worker enters a workplace where a flammable or explosive substance is above 10% of its lower explosive limit, except firefighters in an emergency operation.
- Section 19.9. Hot work is done in accordance with the Manitoba Fire Code, after any container or piping that held a flammable substance has been purged.
What does the Manitoba Fire Code add for dust?
As of November 2026, the Manitoba Fire Code adopts the 2020 National Fire Code of Canada, in effect since January 1, 2024, and the workplace regulation points to it for fire protection equipment and hot work.
The national code's Section 5.3, Dust-Producing Processes, covers dust removal, dust-collecting systems, collector location, bonding and grounding and explosion protection. The Office of the Fire Commissioner's adoption bulletin notes that the 2015 revision of Article 5.3.1.4 raised the dust collector size that triggers its outdoor rule to 2.36 m³/s. Manitoba's own amendments are set out in the Manitoba Fire Code regulation, which the engineer checks for your building. The combustible dust fire code page walks through the national articles.
Who enforces combustible dust rules in Manitoba?
Combustible dust in Manitoba workplaces comes under Workplace Safety and Health, which enforces the Workplace Safety and Health Act and its regulations, while the Office of the Fire Commissioner issues the province's bulletins on the Manitoba Fire Code.
Workplace Safety and Health targets high-risk hazards and sectors and also carries out random inspections. A request for a DHA can follow one of those inspections, a fire inspection, or a property insurer's conditions, which are set out in your policy.
How does a DHA differ from Manitoba's safe work procedures?
Manitoba's safe work procedures are the employer's written instructions for working around fire and explosive hazards, while a DHA is the engineer's evaluation of where those hazards are, how a fire or deflagration could develop and which safeguards are missing.
Section 19.2 requires the procedures but does not say how the hazards behind them are to be found. A DHA, following NFPA 652, works process by process and recommends safeguards with an implementation plan, which gives the procedures a documented basis.
What does a dust hazard analysis cost in Manitoba, and how long does it take?
In Manitoba, a dust hazard analysis of one process or dust collection system has a starting range of $8,000–$15,000 before HST, and the final report typically arrives 4–8 weeks from go-ahead, or 3–6 weeks later if the dust has to be tested first.
Timing turns on how many processes the plant has and whether its dust needs testing. The estimator on this page is set to Manitoba and to a dust hazard analysis.
Manitoba combustible dust questions
At what level must workers stay out of a dusty atmosphere in Manitoba?
Manitoba workers must stay out of any workplace where a flammable or explosive substance is above 10% of its lower explosive limit, half the 20% figure Alberta and Saskatchewan use. Section 19.8 (1) of the Workplace Safety and Health Regulation sets that limit, with an exception for firefighters in an emergency operation.
Does Manitoba require written safe work procedures for dust?
Manitoba requires safe work procedures for fire and explosive hazards at every workplace where flammable substances, including explosive dust, are present. Section 19.2 makes the employer develop and implement them, train workers in them and ensure workers follow them.
How often should a Manitoba DHA be updated?
A Manitoba DHA is best revisited at least every five years, the review cycle in NFPA 652, and whenever a process, collector or dust changes. The safe work procedures under section 19.2 have to stay current with the workplace, and the DHA is what keeps them grounded in the actual hazards.
What happens if a Manitoba plant skips the dust assessment?
Without an assessment of its dust, a Manitoba plant has no engineering basis for the safe work procedures, static control and hot work precautions Part 19 requires. Workplace Safety and Health enforces the Workplace Safety and Health Act and its regulations, including those Part 19 duties.
Does Manitoba’s Part 19 apply at a feed mill?
A Manitoba feed or seed mill generally falls under the Canada Labour Code, not the provincial regulation, because such mills are on the federal list of regulated workplaces. The Canada Occupational Health and Safety Regulations, including section 17.11 on ignition sources where combustible dust is present, are then the rules that generally apply. The engineer confirms which rules cover your mill.
Which fire code applies in Manitoba?
The Manitoba Fire Code applies, built on the 2020 edition of the National Fire Code of Canada since January 1, 2024. The Office of the Fire Commissioner announced that adoption in bulletin OFC 23-004.
Sources
- Workplace Safety and Health Regulation, M.R. 217/2006, Part 19: Fire and Explosive Hazards (opens in a new tab), Government of Manitoba, Manitoba Laws.
- Workplace Safety and Health (opens in a new tab), Government of Manitoba.
- Summary of major changes 2010-2020: National Fire Code of Canada adoption (OFC 23-004) (opens in a new tab), Office of the Fire Commissioner, Manitoba.
- National Fire Code of Canada 2020 (opens in a new tab), National Research Council Canada.
- NFPA 652, Combustible Dust Awareness and Hazard Evaluation (online training series) (opens in a new tab), National Fire Protection Association.
- List of federally regulated industries and workplaces (opens in a new tab), Government of Canada.
- Canada Occupational Health and Safety Regulations (SOR/86-304), section 17.11 (opens in a new tab), Government of Canada, Justice Laws.