
Dust Collector Pre-Start Health and Safety Review
When Ontario's Regulation 851 requires an engineer's review before a dust collector runs, what the sealed report covers, and how it relates to a DHA.
Estimate your cost
A dust collector pre-start health and safety review is an engineer's check of a dust collector before it goes into use in an Ontario factory. It is required when a new or modified collector carries a risk of ignition or explosion that creates an imminent hazard, and it measures the collector against the location and protection rules for easily ignitable fine dust. The engineer's sealed report lists what must be done, and the collector runs only once those measures are in place.
Who needs a dust collector pre-start review, and when is it triggered?
The owner, lessee or employer of an Ontario factory needs a pre-start review when a dust collector is to be installed, or modified with new engineering controls or other measures, and its use involves a risk of ignition or explosion that creates an imminent hazard.
Section 7 (2) of Regulation 851 links the review to an applicable provision and a circumstance in its Table. For dust collectors that is Item 5: the provision is section 65 and the circumstance is that "the use of a dust collector involves a risk of ignition or explosion that creates a condition of imminent hazard to a person's health or safety." Item 5 has no exemptions, and the review is not required at a logging operation.
Which collectors does section 65 (2) leave out?
Four kinds of dust collector are left out of the location rule by Regulation 851 section 65 (2), and Ontario's guideline treats the same four as out of scope for an Item 5 review.
- A collector that uses an inert liquid as the medium to collect dust.
- A woodworking collector of less than 0.47 cubic metres per second, unless it serves wood flour manufacturing.
- A collector that will safely contain explosions.
- A collector that will resist explosions and has effective explosion venting to the outdoors.
Any collector outside those four that handles aluminum, magnesium or another fine dust that is easily ignitable must sit outdoors or in a room reserved for dust-collecting equipment, separated by a dust-tight partition of at least one-hour fire resistance and vented outside (section 65 (1)).
Who carries out and signs the review?
A dust collector pre-start review in Ontario must be carried out by an engineer, whose written report carries their signature, the date and their seal under the Professional Engineers Act before it goes to the owner, lessee or employer.
The ministry guideline lists what the reviewer should or may use to judge compliance, including the Ontario Fire Code, the Ontario Electrical Safety Code, NFPA 652, NFPA 654, NFPA 484 and NFPA 68, and FM Global property loss prevention data sheets.
What does the pre-start review report cover?
The pre-start review report for a dust collector is a sealed written document setting out the measures needed to comply with section 65, plus how workers are protected if the collector is tested before use.
| The report must | Where it is set |
|---|---|
| In writing, to the owner, lessee or employer | s. 7 (5) (a) |
| Signed and dated by the person conducting the review | s. 7 (5) (b) |
| Sealed under the Professional Engineers Act when an engineer conducts it (always, for Item 5) | s. 7 (5) (c) |
| Details of the measures to be taken to comply with section 65 | s. 7 (5) (d) (i); guideline, Item 5 |
| Where testing comes before use, the measures that protect workers during the testing | s. 7 (5) (d) (iii) |
What has to happen before the collector starts up?
Before an Ontario dust collector that needs a pre-start review starts up, the review must be done, its measures taken or written notice given, and a copy of the report given to the joint health and safety committee or representative.
- Review done. The engineer completes the review and the sealed report.
- Measures taken. Every measure the review identifies is in place, or the joint committee or representative has written notice of the measures taken (section 7 (6)).
- Copy shared. The joint committee or representative receives a copy of the report before use (section 7 (7)).
- Records kept. The report and supporting documents stay readily accessible for as long as the collector remains (section 7 (8)).
How does a pre-start review relate to a dust hazard analysis?
A pre-start review is a legal check of one collector against section 65 at the moment it starts, while a dust hazard analysis looks at every process, collector and room for fire and explosion scenarios, so a DHA can supply much of the information the review relies on.
The quick yes-or-no test of whether your collector needs a review is on the dust hazard analysis in Ontario page, and the building rules for collectors are on the Ontario Fire Code dust-producing processes page. For the electrical side, ESA Bulletin 18-1-21 points to the same pre-start review rules for work in classified areas; see hazardous location classification in Ontario.
What does a dust collector pre-start health and safety review cost, and how long does it take?
A dust collector pre-start review in Ontario starts at $3,500–$7,000 before HST for one dust collection system, and typically takes 2–4 weeks from go-ahead to the sealed report, depending on the collector and how much of its design information is ready.
The estimator on this page is preset to a PSR for a dust collector in Ontario; the pricing overview lists the other studies.
Dust collector PSR questions
Does a modified dust collector need a new pre-start review?
A modified dust collector needs a new pre-start review when the change needs new engineering controls or other measures to meet section 65 and the Item 5 risk applies. Section 7 (2) (b) of Regulation 851 covers modified apparatus, alongside new apparatus in clause (a).
Can someone other than an engineer do a dust collector PSR?
Only an engineer can do a dust collector pre-start review in Ontario. Section 7 (4) (a) of Regulation 851 requires an engineer for items 1 to 7 of the Table, and the ministry guideline repeats that a reviewer for Item 5 must be an engineer.
Does the joint health and safety committee get a copy?
The joint health and safety committee, or the health and safety representative, gets a copy of the written review before the collector is used. Section 7 (7) of Regulation 851 sets that duty for the owner, lessee or employer.
How long must the review report be kept?
The review report must be kept readily accessible for as long as the dust collector remains in the workplace. Section 7 (8) of Regulation 851 also covers any supporting documentation.
How often is a dust collector pre-start review needed?
A dust collector pre-start review is needed each time a collector is installed, or modified in a way that needs new controls, rather than on a fixed cycle. Section 7 of Regulation 851 ties the review to new or modified apparatus and sets no renewal interval.
What happens if the review’s measures are not all taken?
If some measures from the review are not taken, the collector may be used only after the joint committee or representative gets written notice of the measures taken. Section 7 (6) (b) of Regulation 851 sets that alternative to taking every measure, with the employer giving the notice.
Sources
- R.R.O. 1990, Reg. 851: Industrial Establishments (sections 7 and 63 to 65) (opens in a new tab), Government of Ontario, e-Laws.
- Guideline for pre-start health and safety reviews, Item 5: Dust collectors (opens in a new tab), Government of Ontario.
- O. Reg. 213/07: Fire Code (Division B, Section 5.3, Dust Producing Processes) (opens in a new tab), Government of Ontario, e-Laws.
- OESC Bulletin 18-1-21: Classification of hazardous locations (opens in a new tab), Electrical Safety Authority.
- NFPA 652, Combustible Dust Awareness and Hazard Evaluation (online training series) (opens in a new tab), National Fire Protection Association.