
Plastic Dust Hazard Analysis: Plastics, Rubber and Chemicals
Where plastic, rubber and chemical dusts hide, what the 2003 resin and polyethylene explosions showed, and the rules that reach these plants.
Estimate your cost
A plastic dust hazard analysis looks at plants that compound, grind, mould, coat or convey plastics, rubber, resins and chemical powders, and asks where their fine particles go. In these plants the dust that matters is often not where people look: it settles above ceilings, inside ductwork and on high ledges, and static from moving powders and pellets is a constant ignition source to manage.
What does a plastic dust hazard analysis cover?
A plastic dust hazard analysis covers the processes that make or move fine plastic, rubber, resin or chemical particles, such as grinding, regrinding, compounding, coating and pneumatic conveying, and the collectors, silos and hidden spaces where those particles can settle.
It also looks at static, since moving powders and pellets build charge, and at hot equipment such as dryers, ovens and extruders near dusty areas. The national fire code requires conveying systems, collectors and dust-producing machines in dust atmospheres to be bonded and grounded (Article 5.3.1.5).
What did the 2003 resin and polyethylene explosions show?
The 2003 explosions at West Pharmaceutical Services in North Carolina and CTA Acoustics in Kentucky, which killed six and seven workers, showed resin and polymer dust building up out of sight and cleaning that raised it into the air.
| Finding | What happened | What the DHA checks |
|---|---|---|
| Hidden accumulation | Polyethylene powder drifted above a suspended ceiling and fuelled a secondary explosion (West, 2003) | Spaces above ceilings, inside ducts and on high ledges, not only visible floors |
| Cleaning that raises dust | Compressed air and brooms created clouds of resin dust (CTA Acoustics, 2003) | Cleanup methods, and whether ignition sources are off first |
| Hot process equipment | A curing oven left open likely ignited resin dust stirred up during cleaning (CTA Acoustics) | Ovens, dryers and hot surfaces near dusty areas |
| Building layout | Flat surfaces and no fire walls between lines let explosions spread (CTA Acoustics) | Surfaces that hold dust and separation between lines |
| Hazard information | The safety data sheet for the polyethylene slurry gave no dust explosion warning (West) | Whether safety data sheets name the combustible dust hazard |
West made rubber parts for pharmaceutical devices; the pharmaceutical and nutraceutical page covers that industry.
Which rules reach plastics, rubber and chemical plants?
Plastics, rubber and chemical plants are reached by the general combustible dust rules rather than by rules that name them: the fire code's dust section, WHMIS for hazard communication, provincial workplace rules, and NFPA 660, the consolidated NFPA standard engineers work to.
- WHMIS. The Hazardous Products Regulations give combustible dust its own hazard class, so a hazardous product that meets the criteria is classified and labelled as one.
- NFPA 660. The 2025 standard consolidates NFPA 654, the general particulate solids standard, and adds self-heating and reactivity evaluation.
- Static. NFPA 77, the static electricity recommended practice, guides bonding and grounding; see bonding and grounding for combustible dust.
Who needs a plastic dust hazard analysis, and where are the plants?
Compounders, moulders with regrind, rubber processors, resin and powder makers, and powder coaters with collectors or pneumatic conveying need a plastic dust hazard analysis, and Statistics Canada counts most of these plants in Ontario.
Statistics Canada's 2025 employer establishment counts, published by Innovation, Science and Economic Development Canada, list 1,803 plastic product manufacturers in Canada, 827 of them in Ontario, 180 in British Columbia and 141 in Alberta; 250 rubber product makers, 94 in Ontario; and 96 resin and synthetic rubber makers, 43 in Ontario.
How does a plastics DHA differ from a wood or food DHA?
A plastics DHA puts more weight on static, hidden accumulation and reactive or self-heating materials than a wood or food DHA, because polymer powders build static charge as they move and chemical products can react as well as burn.
The wood dust and food dust pages cover those industries, and the dust hazard analysis page describes the study itself.
The industries overview compares all five groups.
What does a plastic dust hazard analysis cost, and how long does it take?
For a compounder, moulder or chemical plant, a plastic dust hazard analysis of one process or collection system is priced from $8,000–$15,000 before HST, with the report usually 4–8 weeks after go-ahead and about 3–6 weeks more if the powder still needs laboratory testing.
Plastic, rubber or chemical dust is already chosen in the estimator. Every study's starting range is on the study cost page, and provincial rules on the regulations by province page.
Plastic, rubber and chemical dust questions
When do plastic pellets create combustible dust?
Plastic pellets create combustible dust when conveying, grinding and regrinding wear them into fine particles. Under WHMIS, a mixture shown to catch fire or explode when dispersed in air is a Category 1 combustible dust (Hazardous Products Regulations, s. 7.17.1).
Does a chemical plant’s DHA cover reactive hazards?
A chemical plant’s DHA covers more than explosibility when the product can heat itself or react. NFPA 660’s 2025 edition adds requirements to evaluate self-heating, thermal instability, water reactivity and chemical reactivity hazards.
How often should a plastics plant’s DHA be updated?
A plastics plant’s DHA should be reviewed at least every five years and after any new resin, additive, grinder or collector. NFPA 652 sets the five-year cycle, and BC requires its assessment to be updated after a significant change from January 4, 2027.
What happens if a safety data sheet does not mention combustible dust?
A safety data sheet that leaves out the dust hazard can leave workers unaware of it, as the US Chemical Safety Board found at West Pharmaceutical Services in 2003. In Canada, WHMIS has a Combustible Dusts hazard class, with one category, under the Hazardous Products Regulations.
Sources
- Investigation Report: Combustible Dust Hazard Study (Report No. 2006-H-1) (opens in a new tab), U.S. Chemical Safety and Hazard Investigation Board.
- Hazardous Products Regulations (SOR/2015-17), Subpart 17 Combustible Dusts and Schedule 5 (opens in a new tab), Government of Canada, Justice Laws.
- NFPA 660, Standard for Combustible Dusts and Particulate Solids (opens in a new tab), National Fire Protection Association.
- NFPA 77, Recommended Practice on Static Electricity (opens in a new tab), National Fire Protection Association.
- National Fire Code of Canada 2020 (opens in a new tab), National Research Council Canada.
- NFPA 652, Combustible Dust Awareness and Hazard Evaluation (online training series) (opens in a new tab), National Fire Protection Association.
- Approved amendments for Part 6, Combustible Dusts, in the Occupational Health and Safety Regulation and the Prevention Manual (opens in a new tab), WorkSafeBC.
- Canadian Industry Statistics, Plastic product manufacturing (NAICS 3261): establishments (Statistics Canada data) (opens in a new tab), Innovation, Science and Economic Development Canada.
- Canadian Industry Statistics, Rubber product manufacturing (NAICS 3262): establishments (Statistics Canada data) (opens in a new tab), Innovation, Science and Economic Development Canada.
- Canadian Industry Statistics, Resin, synthetic rubber, and artificial and synthetic fibres and filaments manufacturing (NAICS 3252): establishments (Statistics Canada data) (opens in a new tab), Innovation, Science and Economic Development Canada.