
Hazardous Location Classification in Alberta
What Alberta's OHS Code section 162.1 requires once a hazard assessment finds a hazardous location, and which electrical code applies.
Estimate your cost
A hazardous location classification in Alberta is a legal step, not only an electrical one. Alberta's OHS Code treats combustible dust as a flammable substance, and when an employer's hazard assessment finds that a work area is a hazardous location, a professional engineer has to divide and classify it under the Canadian Electrical Code. The employer then documents the boundaries, keeps the classification current, and applies the protective duties that follow in the same part of the code.
What does OHS Code section 162.1 require?
Alberta employers must have a professional engineer, or a competent person one authorizes, classify any hazardous location the hazard assessment finds, under section 162.1 of the OHS Code, with the boundaries and ignition controls documented and the classification updated when its basis changes.
| Duty | Who | Section |
|---|---|---|
| Classify the work area once the Part 2 hazard assessment finds a hazardous location | Professional engineer, or a competent person a professional engineer authorizes | 162.1 (1) (a) |
| Divide and classify under section 18 of the Canadian Electrical Code | Same | 162.1 (1) (a) |
| Use the oil and gas facilities electrical code, or CEC section 20 facilities rules, where those apply | Same | 162.1 (1) (b), (c) |
| Document the classified boundaries and the measures that prevent unintended ignition | A competent person | 162.1 (1) (d) |
| Review and update the classification when its basis changes | The employer | 162.1 (2) |
| In the classified area: non-igniting equipment, static control, marked or fenced boundaries, release or ignition procedures | The employer | 165 (3) to (6) |
When does an Alberta work area need a classification?
An Alberta work area needs a classification when the hazard assessment required by Part 2 of the OHS Code finds it is a hazardous location, meaning fire or explosion hazards may exist because of combustible dust or other flammable substances.
The OHS Code makes flammable or explosive atmospheres a hazard for that assessment (section 161.1), and defines combustible dust as a dust that can create an explosive atmosphere when suspended in air in ignitable concentrations. The five-question checklist on the dust hazard analysis in Alberta page follows those steps from the first finding to the classified area.
Which electrical code does Alberta use?
As of November 2026, Alberta uses CSA C22.1-24, the 26th edition of the Canadian Electrical Code, declared in force on April 1, 2025 and listed by Alberta Municipal Affairs on its electrical codes and standards page.
The 25th edition, CSA C22.1-21, was in force from February 1, 2022 to March 31, 2025, so a classification prepared before April 2025 may refer to the earlier edition. Section 166 (4) of the OHS Code still uses the Class II and Class III, Division 1 terms of the Canadian Electrical Code for engine restrictions.
What does an Alberta classification give the employer?
An Alberta classification gives the employer the documented boundaries of each hazardous area and the measures to prevent unintended ignition, which the employer needs to apply the section 165 duties on equipment, static, boundaries and procedures.
Where the hazard assessment finds an area is not a hazardous location, section 163 (2) instead limits the flammable substances stored or used there so they could not produce an explosive atmosphere if released.
How does an Alberta classification differ from a DHA?
An Alberta hazardous location classification is the engineer-signed electrical zoning that section 162.1 requires, while a dust hazard analysis in Alberta looks at every fire, flash fire and explosion scenario and the safeguards each one needs.
The national overview of how dust areas are zoned is on the hazardous location classification page, and the fire code rules on the combustible dust fire code page.
How much does hazardous location classification in Alberta cost, and how long does it take?
An Alberta hazardous location classification for a single dust-producing process or collector is priced from $4,000–$9,000 before HST, with the engineer's classification usually delivered 3–6 weeks after go-ahead; large or multi-room plants take longer.
The estimator here is set to Alberta; every study's starting range is on the cost page.
Alberta hazardous location questions
Which Canadian Electrical Code edition applies in Alberta?
Alberta applies CSA C22.1-24, the 26th edition of the Canadian Electrical Code, declared in force on April 1, 2025. Alberta’s electrical codes and standards page lists the 25th edition as in force from February 1, 2022 to March 31, 2025.
What must Alberta classification documents show?
Alberta classification documents must show the boundaries of each classified area and the specific measures that prevent unintentional ignition of an explosive atmosphere. Section 162.1 (1) (d) of the OHS Code requires a competent person to prepare and maintain that documentation.
Can an engine run in a dusty hazardous location in Alberta?
An internal combustion engine may not be located in a Class II, Division 1 or a Class III, Division 1 hazardous location in Alberta. Section 166 (4) of the OHS Code sets that rule, using the classes as the Canadian Electrical Code defines them.
When must an Alberta classification be updated?
An Alberta classification must be reviewed and updated whenever the hazard assessment shows that the basis of the classification has changed. Section 162.1 (2) of the OHS Code puts that duty on the employer.
What happens if an Alberta employer never classifies a dust area?
An Alberta employer whose hazard assessment finds a hazardous location but never classifies it is not meeting section 162.1 of the OHS Code. The duties in section 165 (3) to (6), from non-igniting equipment to marked boundaries, also depend on knowing where the classified area is.
Sources
- Occupational Health and Safety Code, Part 10: Fire and Explosion Hazards (Alberta Regulation 191/2021) (opens in a new tab), Government of Alberta.
- Occupational Health and Safety Code, Part 1: Definitions and General Application (opens in a new tab), Government of Alberta.
- Electrical codes and standards (opens in a new tab), Government of Alberta (Municipal Affairs).
- Occupational health and safety (OHS) (opens in a new tab), Government of Alberta.