Skip to content
DustHazardAnalysis.ca
Menu

Dust Hazard Analysis in Saskatchewan

How Saskatchewan's OHS regulations treat explosive dust, what the fire code adds, and what a DHA costs.

Estimate your cost

Would you like to get pricing for the following equipment that will likely be required as a result of your study?

A dust hazard analysis in Saskatchewan answers the questions the province's workplace safety rules raise for any dust that can create an explosive atmosphere. Those rules count such dust as a flammable substance, so an employer needs written procedures, trained workers, ignition control and testing before hot work wherever it is present. The National Fire Code of Canada adds its rules for buildings with dust-producing processes. A DHA shows where your dust is, how it could ignite and which of those duties each area calls for.

Who needs a dust hazard analysis in Saskatchewan?

Saskatchewan employers, contractors and owners that handle, use, store, produce or dispose of a dust able to create an explosive atmosphere are the ones whose dust hazards need assessing, because the regulations treat that dust as a flammable substance.

The definition in section 25-1 of the Occupational Health and Safety Regulations, 2020 covers "dust that is capable of creating an explosive atmosphere when suspended in air in concentrations within the explosive limit of the dust". Part 25 never uses the words dust hazard analysis. It sets the duties a DHA examines, and it applies to any place of employment where such a dust is present, whatever the industry.

In Saskatchewan, grain elevators, feed and seed mills, feed warehouses and grain-seed cleaning plants are a different case.

They generally come under the Canada Labour Code, not Part 25, because they are on the federal list of regulated industries and workplaces, and the federal rules include a hot work section that calls for dust-free surroundings and a qualified person on watch. The engineer confirms which rules cover a given site.

The food, grain and feed industry page explains these workplaces further.

What do Saskatchewan's OHS regulations require for explosive dust?

For explosive dust, Saskatchewan's Part 25 comes down to written procedures, trained workers, eliminated or controlled ignition sources, bonding during transfers, a limit on entry and suitable tests before any hot work.

  • Section 25-5. Where a flammable substance is handled, used, stored, produced or disposed of, the employer, contractor or owner develops written procedures for workers who handle a substance that may ignite or who do hot work where there is a risk of fire, and trains workers in them.
  • Section 25-9. Suitable procedures prevent the ignition of explosive dusts at a worksite, every source or potential source of ignition is eliminated or controlled where an explosive atmosphere exists or is likely to, and containers are bonded during transfers.
  • Section 25-11. No worker enters or works where a flammable or explosive substance is above 20% of its lower explosive limit, apart from trained firefighters and competent workers in an emergency.
  • Section 25-12. Before hot work, suitable tests show whether there is enough flammable substance for an explosive atmosphere and confirm the work is safe; the tests are repeated during the work and recorded.

What does the fire code require in Saskatchewan?

As of November 2026, Saskatchewan applies the National Fire Code of Canada 2020, adopted through amendments to The Fire Safety Regulations under The Fire Safety Act and in effect since January 1, 2024.

The code's Dust-Producing Processes section, Section 5.3, reaches any building or part of a building where the amount or concentration of combustible dust creates a fire or explosion hazard. It requires surfaces to be kept clean by vacuum with non-sparking, grounded equipment, dust-collecting systems designed to good engineering practice, collectors over 2.36 m³/s outside or protected, bonding and grounding, and explosion venting or an explosion prevention system. The engineer checks the Saskatchewan regulations that adopt the code for any provincial change; the national articles are set out one by one on the combustible dust fire code page.

Who enforces combustible dust rules in Saskatchewan?

Combustible dust in Saskatchewan workplaces is a matter for Occupational Health and Safety at the Ministry of Labour Relations and Workplace Safety, which handles investigations and enforcement, while the fire code is adopted under The Fire Safety Act.

A DHA can be asked for after an OHS inspection, during a fire inspection under the fire code, or as a condition from a property insurer. Insurers put their requirements in the policy, so check yours.

How does a DHA differ from Saskatchewan's written procedures?

Saskatchewan's written procedures tell workers how to handle a flammable substance safely day to day, while a DHA is the engineering study behind them, identifying each fire, flash fire and explosion hazard and the safeguards it needs.

The procedures in sections 25-5 and 25-9 are the employer's to write and keep current. A DHA, as NFPA 652 describes it, evaluates the process areas where hazards exist and recommends safeguards with a plan to put them in. Its findings tell you what the procedures have to control: which areas can hold an explosive atmosphere, which ignition sources are present and where testing before hot work matters most.

What does a dust hazard analysis cost in Saskatchewan, and how long does it take?

Expect a starting range of $8,000–$15,000 before HST for a dust hazard analysis in Saskatchewan covering one process or dust collection system, and typically 4–8 weeks between go-ahead and report, with dust testing adding about 3–6 weeks.

The schedule depends on the number of processes and on any laboratory testing of the dust. For a range that fits your site, use the estimator, which opens with Saskatchewan selected; scope and price are confirmed by the engineer after a short call.

Saskatchewan combustible dust questions

Where are Saskatchewan’s rules for explosive dust?

Saskatchewan’s rules for explosive dust sit in Part 25 of the Occupational Health and Safety Regulations, 2020, which treats such dust as a flammable substance. Section 25-1 defines a flammable substance to include dust that can create an explosive atmosphere when suspended in air within its explosive limit.

When is hot work allowed near explosive dust in Saskatchewan?

Hot work near explosive dust is allowed in Saskatchewan only after suitable tests confirm it can be done safely and the written hot work procedures are in place. Section 25-12 requires those tests before the work, repeated at suitable intervals with the results recorded, and purging of any container or piping that held a flammable substance.

How often should a Saskatchewan DHA be updated?

A Saskatchewan DHA should be reviewed at least every five years, the cycle NFPA 652 sets, and again when processes, equipment or the dust itself change. NFPA 652 is a standard rather than Saskatchewan law, while the written procedures required by section 25-5 must keep matching the work being done.

What happens if a Saskatchewan site has no DHA?

A Saskatchewan site without a DHA still has to meet Part 25: written procedures, trained workers and control of every ignition source where an explosive atmosphere may exist. Section 25-9 requires suitable procedures to prevent the ignition of explosive dusts, and section 25-11 bars work where a flammable substance exceeds 20% of its lower explosive limit.

Do Saskatchewan’s rules apply to a grain elevator?

Saskatchewan’s OHS regulations generally do not govern a grain elevator, because grain elevators are on the federal list of regulated workplaces. The Canada Labour Code and the federal Canada Occupational Health and Safety Regulations generally apply there, and section 17.11 sets the precautions for ignition sources and hot work near combustible dust. Which rules cover a given site is for the engineer to confirm.

Which fire code edition applies in Saskatchewan?

Saskatchewan applies the National Fire Code of Canada 2020, in effect since January 1, 2024. The Government of Saskatchewan says it was adopted through amendments to The Fire Safety Regulations under The Fire Safety Act.

Sources

  1. The Occupational Health and Safety Regulations, 2020 (RRS c S-15.1 Reg 10), Part 25: Fire and Explosion Hazards (opens in a new tab), Government of Saskatchewan, Publications Centre.
  2. Safety in the workplace (opens in a new tab), Government of Saskatchewan.
  3. National Building Code, National Fire Code, National Plumbing Code and National Energy Code for Buildings (opens in a new tab), Government of Saskatchewan.
  4. National Fire Code of Canada 2020 (opens in a new tab), National Research Council Canada.
  5. NFPA 652, Combustible Dust Awareness and Hazard Evaluation (online training series) (opens in a new tab), National Fire Protection Association.
  6. List of federally regulated industries and workplaces (opens in a new tab), Government of Canada.
  7. Canada Occupational Health and Safety Regulations (SOR/86-304), section 17.11 (opens in a new tab), Government of Canada, Justice Laws.